Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

6inch New Step Type - manufacturer, factory, supplier from China

(Total 20 Products for 6inch New Step Type)

  • 6inch NEW STEP TYPE DRAG BIT

    6inch NEW STEP TYPE DRAG BIT

    • Brand: Deris

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001

    6 NEW STEP TYPE DRAG BIT There are several types of drag bits that each have they re own purpose and are better at certain types of drilling than others For example drag bits are not ideal for hard rock formations or coarse gravel but their uses for exploration and environmental drilling are well documented and their...

    Contact Now

  • 16inch HDD Rock Reamer Bit PDC Hole Opener

    16inch HDD Rock Reamer Bit PDC Hole Opener

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    Hole opener Large diameter assembled bit is widely used in construction bridge highway and railway construction This series of bits are suitable to various kinds of strata including shale limestone cobblestone dolomite and conglomerate 1 Suitable for medium to medium hard formation of high Crushing Resistance hard...

    Contact Now

  • 8 10 12 14inch -3wing/4wing step drag bit

    8 10 12 14inch -3wing/4wing step drag bit

    • Brand: Deris

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001

    A drag bit is a drill bit usually designed for use in soft formations such as sand clay or some soft rock However they will not work well in coarse gravel or hard rock formations Uses include drilling water wells mining geothermal environmental and exploration drilling Whenever possible they should be used to drill...

    Contact Now

  • 6" 152mm alloy steel drilling step drag bit

    6" 152mm alloy steel drilling step drag bit

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris supplies a variety of drag bits for many types of projects drilling needs including 3 wing type bits for soft and medium formations 4 wing especially 4 wing chevron type for harder formations Each of our bits is machined from a forging to exacting standards and then tipped with tungsten carbide Mining...

    Contact Now

  • 9 7/8" new metal-face sealed bearing tricone bit

    9 7/8" new metal-face sealed bearing tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Depending on your application hejian Deris can provide you with new re run or premium oil field quality Tricone bits The difference between a premium oil field tricone bit for oil well and non premium oil well quality three cone bits that the roller cones have high end sealed bearings extremely high quality tungsten...

    Contact Now

  • 17 1/2" new kingdream tci tricone rock bit

    17 1/2" new kingdream tci tricone rock bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    17 1 2 new kingdream tci tricone rock bit kingdream oil tci drilling bits Gauge protection can also significantly increase the lifespan of a tricone drill bit kingdream rotary rock bits designed for hard formations continue the trend of less protruding teeth placed closer together The teeth will be very short and...

    Contact Now

  • 26inch trenchless no dig hole opener reamer bit

    26inch trenchless no dig hole opener reamer bit

    • Brand: Deris

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO9001

    We provides some samples of Rock Back Reamers we have manufacture for our clients No Dig Equipment carries some stock hole openers in house however most of these reamers need to be made to order We accept OEM and according to customer requirement So if you require a specific hole opener for your next job please tell...

    Contact Now

  • welding type sealed bearing TCI tricone bit palm

    welding type sealed bearing TCI tricone bit palm

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Advantage of tricone bit Palm Hard Alloy Welding Pervent bit wear and tear work and protect the bearing Hard alloy drill palm surface neck protection prevent bit wear in abrasive formation High stength tunsten carbide teeth high temperature hear treatment forged alloy steel Lubricating system protection of the bearing...

    Contact Now

  • 500mm new/used tricone reamer drills bit hole opener

    500mm new/used tricone reamer drills bit hole opener

    • Brand: Deris CS TZ JZ

    • Packaging: woode case

    • Supply Ability: 300 pcs per year

    • Min. Order: 1 Piece/Pieces

    500mm new used tricone reamer drills bit hole opener Number of Cutters The number of cutters placed on a hole opener is governed by the following facts 1 Maximum number which will fit around the perimeter 2 The greater the number of cutters the less the weight which therefore reduces the penetration rate 3 In softer...

    Contact Now

  • 3 wings Stepped Drag Bit water well drilling

    3 wings Stepped Drag Bit water well drilling

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    The Stepped Drag Bits can penetrate softer formations such as stiff clays and mudstones very quickly Usually used for construction or other site investigation projects It has two types Step Type and Chevron Type Deris can design the special size per customers requirements The step drag rock drill bit with simple...

    Contact Now

  • welding type tci single roller cone bit cutters

    welding type tci single roller cone bit cutters

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Our drill bit can be used for 150 300 hours Soft formations will last longer 1 Hardfaced head bearing surface inner hole of cone is silver plated Thelosd capacity and seizure resistance of the bearing is greatly improved 2 Adopt the optimum design of high strength and high toughness hard alloy tooth arrangement tooth...

    Contact Now

  • 7 7/8" brand new IADC 537 Tricone Bit

    7 7/8" brand new IADC 537 Tricone Bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The Advantages of Using a Tri Cone Over Other Drill Bits 1 There is a Tri Cone suitable for any rock formation 2 Tricone bit is versatile and can handle changing formations 3 Tri Cones are reasonably priced long lasting and have an efficient drilling rate 4 Tricone is that the roller cones have high end sealed...

    Contact Now

  • 3 wing step drag drill bit for well

    3 wing step drag drill bit for well

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Step type Drag bits are typically used in very soft or alluvial formations such as unconsolidated sands clays and can be used for scraping liners in workover applications etc However due to the expense of tripping in and out of the hole the lower cost of these non moving part drag bits versus roller cones have a...

    Contact Now

  • 14inch step drag bit for well

    14inch step drag bit for well

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    Step type Drag bits are typically used in very soft or alluvial formations such as unconsolidated sands clays and can be used for scraping liners in workover applications etc However due to the expense of tripping in and out of the hole the lower cost of these non moving part drag bits versus roller cones have a...

    Contact Now

  • PDC diamond step drag engraving drill bit

    PDC diamond step drag engraving drill bit

    • Brand: Deris

    • Packaging: Wooden case package

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    PDC diamond step drag engraving drill bit A drilling tool that uses polycrystalline diamond compact PDC cutters to shear rock with a continuous scraping motion These cutters are synthetic diamond disks about 1 8 in thick and about 1 2 to 1 in in diameter PDC bits are effective at drilling shale formations especially...

    Contact Now

  • 215.9mm 637 new tci kingdream tricone drill bit

    215.9mm 637 new tci kingdream tricone drill bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Precautions for the use of tricone drill bit Precautions for the use of tricone drill bit 3 Nozzle installation Reasonably choose the roller bit nozzle to fully exert the role of hydraulic rock breaking and cleaning During installation check whether the 0 ring in the water hole of the roller bit is intact The nozzle...

    Contact Now

  • Lower price renew 12 1/4" TCI tricone bit

    Lower price renew 12 1/4" TCI tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    For a more cost effective solution to your Drilling Needs SAVE up to 75 of the cost on a new bit China 12 1 4 Shirttail Protection Used Tricone Bits for Sale High Quality 3 3 4 26 Tricone Drill Bit Tungsten Carbide Insert RocK Roller Bits With API Thread from China manufacturer Hard Facing Used Rock Bits Both Tooth...

    Contact Now

  • Professional 3 or 4 wing step drag bit

    Professional 3 or 4 wing step drag bit

    • Brand: Deris

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001

    PDC Drag Bits also named blade bits with a Tungsten Carbide inserts on the blades Suitable Formation They are usually designed for use in soft formations such as sand clay or some soft

    Contact Now

  • three wings step drag bit 2 3/8 thread

    three wings step drag bit 2 3/8 thread

    • Brand: Deris

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001

    three wings step drag bit 2 3 8 thread we supplies a variety of drag bits for many types of projects drilling needs including 3 wing type bits for soft and medium formations 4 wing especially 4 wing chevron type for harder formations Each of our bits is machined from a forging to exacting standards and then tipped...

    Contact Now

  • 6inch 152mm 4blades PDC drill bit

    6inch 152mm 4blades PDC drill bit

    • Brand: Deris

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001

    PDC Polycrystalline Diamond Compact bits are particularly suited to Oil Gas and HDD Now with improved technology and lower costs PDC bits are making headway into water well geotechnical and mining PDC Bits to provide steel body PDC bits as well as a number of other drilling products to optimize drilling efficiency and...

    Contact Now

Review

Sheikh Muhammad Nawaz

Sep 19, 2019 5

Very good manufacturer, arrive before the expected and the quality of 6inch New Step Type satisfied.
Damion Rose

Sep 16, 2019 5

Thank you. Great manufacturer. The 6inch New Step Type has a very good quality.
Majeed Hamza

Sep 15, 2019 4

Very fast shipping, well packed, the seller is very helpful. I recommend Hejian Deris Petroleum Drilling Equipment Co.,Ltd. and this product.
  • Video
  • 9 7/8" new metal-face sealed bearing tricone bit
  • Lower price renew 12 1/4" TCI tricone bit
"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation with the long-term to create collectively with buyers for mutual reciprocity and mutual advantage for 6inch New Step Type , 6inch NEW STEP TYPE , 36 inch hole opener , we welcome customers to phone or e-mail us for cooperation.
"We not only will try our greatest to supply outstanding services to every shopper, but also are ready to receive any suggestion offered by our buyers for 6inch New Step Type , 6inch NEW STEP TYPE , 36 inch hole opener , Our merchandise are mainly exported to Europe Africa, America, the Middle East and Southeast Asia and other countries and regions. We now have enjoyed a great reputation among our customers for quality goods and good services.We would make friends with businessmen from at home and abroad following the purpose of "Quality First Reputation First the Best Services."

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.