Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

Hard Formation Roller Bits - manufacturer, factory, supplier from China

(Total 24 Products for Hard Formation Roller Bits)

  • Hard formation core barrel with roller bits

    Hard formation core barrel with roller bits

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    Hard formation core barrel with roller bits 1 Product Description Rock Drilling Core Barrels with Roller Bits adopt the high carbon steel and special drilling bits angle to keep the drilling strength and

    Contact Now

  • 12 1/4" milled tooth tricone bits sealed bearing

    12 1/4" milled tooth tricone bits sealed bearing

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • horizontal directional drilling rock reamer tricone bits

    horizontal directional drilling rock reamer tricone bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drilling is a drilling method that relies on the energy of the drill and the drill to act on the roller bit to break the rock The energy acting on the roller bit by the drill includes the swivel action and the downward thrust The lower thrust is achieved by the gravity of the drill on the roller bit and the hydraulic...

    Contact Now

  • Guide pilot Tri Hawk Drill Bits HDD project

    Guide pilot Tri Hawk Drill Bits HDD project

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • 6 blades hard rock reamers PDC hole opener

    6 blades hard rock reamers PDC hole opener

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    PDC Hole Openers Are Available In 1 Piece Designs In Sizes Up To 30 Our REPLACEABLE BLADE PDC HOLE OPENERS Are Available In Sizes Up To 50 PDC Hole Openers Drill Faster And Smoother Have Longer Service Life Than Roller Cone Hole Openers PDC Hole Openers Have No Moving Parts Which Can Break Off During The Reaming...

    Contact Now

  • 15 1/2" IADC 537 Medium hard rock bit

    15 1/2" IADC 537 Medium hard rock bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd produce well drill tricone bit with Journal bearing Hardfaced head bearing surface Inner hole of cone is silver plated The load capacity and seizure resistance of the bearing is greatly improved O ring seal is made of the more wear resistance high saturated buna N with...

    Contact Now

  • oil well roller cone steel tooth tricone bit

    oil well roller cone steel tooth tricone bit

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Basical Specification product name 11 5 8 inch IADC 117 steel tooth tricone drilling

    Contact Now

  • Air Cooling TCI Roller Bearing Tricone Bits

    Air Cooling TCI Roller Bearing Tricone Bits

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Cutting Structure The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit Gauge Structure Multiple gauge protection with gauge trimmers on the heel of cone tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing...

    Contact Now

  • iadc 417 rock drill bits water well rigs

    iadc 417 rock drill bits water well rigs

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • Hard Rock Core Barrel With Roller Cone bit

    Hard Rock Core Barrel With Roller Cone bit

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 300 pcs per year

    • Min. Order: 1 Piece/Pieces

    Rock Drilling Core Barrels with Roller Bits adopt the high carbon steel and special drilling bits angle to keep the drilling strength and efficiency There are tree types of core barrels 1 Core barrel with bullet teeth is used for cutting an annular ring in rock or concrete also reinforced concrete 2 Core barrel with...

    Contact Now

  • IADC 637 tricone bit palm single roller cones

    IADC 637 tricone bit palm single roller cones

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Reliable and stable sealing structure metal sea and rubber seal optional The Tricone Bit palm bearing surface is hard coated with hard allor layer and the roller bearing is silver plated which improves the bearing capacity and the resistance to seizure Adopt hight toughness carbide teeth to improve the impact...

    Contact Now

  • 8.5" tricone bit IADC 537 Replacement roller cones

    8.5" tricone bit IADC 537 Replacement roller cones

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The new tricone drill bit cutters insert extremely high quality tungsten carbide High effectively cutting ability abd strong anti breaking ability which can increase ROP and improve service life of bit effectively sealed journal bearing extend drill tci tricone bit cutter life The bit can achieve longer service life...

    Contact Now

  • TCI Tricone hard rock well drilling bit

    TCI Tricone hard rock well drilling bit

    • Brand: Deris

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    TCI Tricone hard rock well drilling bit use precautions Drill bit into the well 1 Check the rock drill bit flow path before the drill bit enters the well to prevent blockages 2 When connecting the hard rock drill bit be careful not to bump the cutting teeth otherwise the life of the drill bit will be shortened 3 In...

    Contact Now

  • Durable Hard Rock Drilling HDD Hole Opener 15inch

    Durable Hard Rock Drilling HDD Hole Opener 15inch

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd supplies a wide assortment of hole openers for many drilling applications The main body is constructed from 4130 4145 high alloy steel for incredible strength and toughness The hole openers can drill through soft to hard formations and can come equipped with Mill Tooth...

    Contact Now

  • 17 1/2 tci tricone rock roller drilling bit

    17 1/2 tci tricone rock roller drilling bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Corrective actions for bit balling are 1 Pick up off approximately half meter and circulate for 10 to 15 minutes with full flow 2 The bit was swiveled by using different means according to drill rig Waste matters adhered on the surface of a bit threw off by using centrifugation Corrective actions for bit bouncing are...

    Contact Now

  • tungsten carbide insert 20 inch tci tricone bits

    tungsten carbide insert 20 inch tci tricone bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    The teeth on the cone are divided into two types Tungsten carbide insert teeth and steel Mill teeth The insert teeth is made by drilling a ring gear on the outer tapered surface of the cone and inserting carbide teeth of different sizes and shapes the steel teeth are directly milled from the cone cone The teeth of the...

    Contact Now

  • 14 3/4" IADC 537G roller Tricone drill bit

    14 3/4" IADC 537G roller Tricone drill bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Why roller cone drill the most widely used Due to impact crushing and shearing rock breaking when roller cone rotates the contact area between cone and bottom hole is small the specific pressure is high the working torque is small and the working blade has a large total length and can be suitable for rock of various...

    Contact Now

  • Carbide Material Forging Processing 5 7/8 kingdream bits

    Carbide Material Forging Processing 5 7/8 kingdream bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500pcs/month

    • Min. Order: 1 Piece/Pieces

    Carbide Material Forging Processing kingdream bits The majority of the bits that we recycle are from the mining and energy industries Tricone bit are used in the mining industry to drill blastholes at open pit mines A blasthole is a hole approximately 50 in depth that is drilled and packed with explosive A series of...

    Contact Now

  • 8 1/2" hard rock drilling tricone bit

    8 1/2" hard rock drilling tricone bit

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    Hard Rock TCI Drilling Bit insert hard tungsten carbid teeth The hardness and wear resistance of the cemented carbide teeth are higher than that of the steel teeth and the service life is longer than that of the steel teeth especially for the hard layer with abrasiveness It has a wide range of applicable strata...

    Contact Now

  • 12 inch TCI tricone bit hard formation

    12 inch TCI tricone bit hard formation

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    12 inch TCI tricone bits are designed for soft to very hard formations depending on the style and quantity of the carbides on the tricone bit because of its versatility and performance it s still one of the main roller cone bit in use today it is widely used for oil gas water well geotechnical environmental geothermal...

    Contact Now

  • 14 3/4 iadc535 roller bearing tci tricone bit

    14 3/4 iadc535 roller bearing tci tricone bit

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO9001

    new 14 3 4 iadc 535 roller bearing tricone bit We offers a variety of tricones from sealed bearing button TCI bits to open bearing steel tooth tricone bit in a wide range of sizes in new rebuilt and unused surplus The bearings are what make the cones on a Tricone spin There are four common types of bearings standard...

    Contact Now

  • Forging Hard Rock Tricone Bits Oil Well Drilling

    Forging Hard Rock Tricone Bits Oil Well Drilling

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 30pcs/week

    • Min. Order: 1 Piece/Pieces

    forging hard rock tricone bits oil well drilling Tricone bit are the workhorses of the drilling industry They can be found in a wide range of applications mining energy water geothermal geotechnical foundation and directional drilling Tricone drill bits are sometimes referred to as rotary bits or rock bits Tricone...

    Contact Now

  • down hole High air pressure rock button bits

    down hole High air pressure rock button bits

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    Convex DTH hammer bit Advantages Our dth bits can transmit intensive impact energy into the rock with the least loss of energy which can help you improve efficiency and reduce costs Product life We select high strength structure alloy steel and carbides with best quality to ensure the drill body and alloy body can...

    Contact Now

  • 12 1/4" steel tooth tricone rock roller bit

    12 1/4" steel tooth tricone rock roller bit

    • Brand: Deris

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    IADC CODE TRICOEN BITS First Digit 1 2 3 designate steel tooth bits and the formation being drilled with 1 for soft 2 for medium and 3 for hard formations 4 5 6 7 and 8 designate tungsten carbide insert bits and the formation being drilled with 4 being the softest and 8 the hardest formation Second Digit 1 2 3 and 4...

    Contact Now

Review

Nick Wills

Apr 26, 2020 4

Very nice product, prompt shipping.Recommend Hejian Deris Petroleum Drilling Equipment Co.,Ltd. company!
Dewi Anggraeni

Apr 16, 2020 5

I have to say this Hard Formation Roller Bits is brilliant, and the this company have the most helpful service with introductions. I would like to recommend this Hejian Deris Petroleum Drilling Equipment Co.,Ltd. to my friends.
Sharon Wang

Apr 12, 2020 5

What a nice Hard Formation Roller Bits ! I love it!
  • Video
  • oil well roller cone steel tooth tricone bit
  • 14 3/4" IADC 537G roller Tricone drill bit
  • 12 inch TCI tricone bit hard formation
  • Related Information
Our goods are broadly recognized and reliable by users and can meet consistently switching financial and social demands of Hard Formation Roller Bits , Hard Formation Well , Tricone Roller Bits , you should truly feel free to make contact with us. We're on the lookout forward to forming prosperous organization associations with new customers around the earth within the close to upcoming.
"Our goal is usually to deliver high quality items at aggressive price ranges, and top-notch service to shoppers around the entire world. We're ISO9001, CE, and GS certified and strictly adhere to their high quality specifications for Hard Formation Roller Bits , Hard Formation Well , Tricone Roller Bits , As a way to use the resource on the expanding info in international trade we welcome prospects from everywhere on the web and offline. In spite on the high quality items we present effective and satisfying consultation service is supplied by our qualified after-sale service group. Item lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So be sure to make contact with us by sending us emails or call us when you've got any questions about our organization. ou could also get our address information from our site and come to our enterprise. We get a field survey of our merchandise. We are confident that we are going to share mutual accomplishment and create solid co-operation relations with our companions within this market place. We're seeking forward for your inquiries.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List