Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

New 14 3 4 Iadc 535 - manufacturer, factory, supplier from China

(Total 24 Products for New 14 3 4 Iadc 535)

  • Kingdream 9 7/8" iadc127 steel tooth tricone bit

    Kingdream 9 7/8" iadc127 steel tooth tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris a professional company in supplying tricone bits steel teeth bits single cone bits and PDC bits Bits sizes range from 3 7 8 to 26 and cover almost all IADC codes It can be used in various of different fields mining hydrology subterranean heatpilling water well drilling and oil well drilling This type of...

    Contact Now

  • 15 1/2" IADC 537 Medium hard rock bit

    15 1/2" IADC 537 Medium hard rock bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd produce well drill tricone bit with Journal bearing Hardfaced head bearing surface Inner hole of cone is silver plated The load capacity and seizure resistance of the bearing is greatly improved O ring seal is made of the more wear resistance high saturated buna N with...

    Contact Now

  • well drilling api standard rock tricone bit iadc517

    well drilling api standard rock tricone bit iadc517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The cost of a good drill bit varies from about 1 to 5 of the total cost but the drill bit will affect up to 75 of your total cost The right drill bit for the right job gives the advantages of Reducing the number of times you trip Increased rate of penetration when drilling means more holes faster Straighter holes and...

    Contact Now

  • iadc 417 rock drill bits water well rigs

    iadc 417 rock drill bits water well rigs

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • IADC 637 tricone bit palm single roller cones

    IADC 637 tricone bit palm single roller cones

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Reliable and stable sealing structure metal sea and rubber seal optional The Tricone Bit palm bearing surface is hard coated with hard allor layer and the roller bearing is silver plated which improves the bearing capacity and the resistance to seizure Adopt hight toughness carbide teeth to improve the impact...

    Contact Now

  • 8.5" tricone bit IADC 537 Replacement roller cones

    8.5" tricone bit IADC 537 Replacement roller cones

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The new tricone drill bit cutters insert extremely high quality tungsten carbide High effectively cutting ability abd strong anti breaking ability which can increase ROP and improve service life of bit effectively sealed journal bearing extend drill tci tricone bit cutter life The bit can achieve longer service life...

    Contact Now

  • 14 inch horizontal directional drilling PDC hole opener

    14 inch horizontal directional drilling PDC hole opener

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Hole opener Large diameter assembled bit is widely used in construction bridge highway and railway construction This series of bits are suitable to various kinds of strata including shale limestone cobblestone dolomite and conglomerate 1 Suitable for medium to medium hard formation of high Crushing Resistance hard...

    Contact Now

  • 14 3/4" IADC 537G roller Tricone drill bit

    14 3/4" IADC 537G roller Tricone drill bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Why roller cone drill the most widely used Due to impact crushing and shearing rock breaking when roller cone rotates the contact area between cone and bottom hole is small the specific pressure is high the working torque is small and the working blade has a large total length and can be suitable for rock of various...

    Contact Now

  • iadc 637 tricone rock bit of brand kingdream

    iadc 637 tricone rock bit of brand kingdream

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations The HSN rubber O ring provides adequate sealing for bearing durability...

    Contact Now

  • iadc737 17 1/2 tungsten carbide insert rock bit

    iadc737 17 1/2 tungsten carbide insert rock bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Get more power Use less fluid Rock It Mud Motors convert drill fluid pressure into maximum torque so you get more drilling time before stopping for maintenance It s not magic When you driling well Please select the applicable formation and parameters according to the instructions Carefully check the roller cone bit...

    Contact Now

  • 14 3/4 iadc535 roller bearing tci tricone bit

    14 3/4 iadc535 roller bearing tci tricone bit

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO9001

    new 14 3 4 iadc 535 roller bearing tricone bit We offers a variety of tricones from sealed bearing button TCI bits to open bearing steel tooth tricone bit in a wide range of sizes in new rebuilt and unused surplus The bearings are what make the cones on a Tricone spin There are four common types of bearings standard...

    Contact Now

  • 9 7/8" IADC 537G tricone insert bit

    9 7/8" IADC 537G tricone insert bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd produce well drill tricone bit with Journal bearing Hardfaced head bearing surface Inner hole of cone is silver plated High wear resistance and excellent cutting ability of the tungsten carbide insert bits are given full play by using carbide compacts of high strength...

    Contact Now

  • 10.5" IADC535 seal bearing Tricone rock bits

    10.5" IADC535 seal bearing Tricone rock bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd provide you High quality Tricone bit Our precision bearings are made with the tightest tolerances in the industry The bearing materials used have extremely low friction and high load capacity We use one of the most chemically resistant heat tolerant HNBR materials for...

    Contact Now

  • insert tricone rock drill roller bits iadc 517

    insert tricone rock drill roller bits iadc 517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Optimal test method for drilling parameters 1 Drill for 5 minutes with initially selected proper WOB and moderate RPM 60 100r min and record the ROP as shown in the table below 2 Moderately increase WOB and keep the same RPM and drill under this WOB for 5 minutes and again record the RPO as shown in the table below 3...

    Contact Now

  • 12 1/4" iadc117 steel tooth tricone bit

    12 1/4" iadc117 steel tooth tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drill down Drill down to be smooth to avoid stress and excitement Through the blowout preventer group casing head reduced diameter section a large dogleg shoulder and casing shoes to control the decentralization speed Light through the narrow section draw the pump must be opened When planning the hole close to the...

    Contact Now

  • IADC 537 tricone bit Rectangular leg

    IADC 537 tricone bit Rectangular leg

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The Advantages of tricone bit cutters 1 Single cone bit is a bit slow that cone drill bit of speed than the speed of smaller mainly chaotic cutting rock suitable for high speed high pressure drilling wells sidetracking the old old wells deepened so slim hole drilling Applications more widely applicable not only to...

    Contact Now

  • 8-1/2" IADC517 replacement tricone legs /segment drill bit

    8-1/2" IADC517 replacement tricone legs /segment drill bit

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    8 1 2 IADC517 replacement tricone legs segment drill bit The advantage of replacement tricone legs 1 Single cone bit is a bit slow that cone drill bit of speed than the speed of smaller

    Contact Now

  • 14 3/4" tricone bits iadc 637 hard rock

    14 3/4" tricone bits iadc 637 hard rock

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Deris company produce This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formation The HSN rubber O ring provides adequate sealing for bearing durability Bit break in 1 Overusing display instruments when bit approach bottom hole If the WOB and torque increase that...

    Contact Now

  • 17 1/2" iadc 517 tci kingdream roller bit

    17 1/2" iadc 517 tci kingdream roller bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Deris company offers new steel tooth and tungsten carbide insert tci tricone bits in sizes from 3 1 2 26 with open or sealed bearings regular or jet circulation and a wide range of additional custom features for ideal performance in any formation Tricone bits can be customized to optimize penetration rates and bit...

    Contact Now

  • 14 3/4" oil tricone drill head bits

    14 3/4" oil tricone drill head bits

    • Brand: Deris CS TZ JZ

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    Oil Wells Tricone Bit with our reliable elastomer seal are the right choice for conventional applications You can rely on the durable cutting structure with tougher carbide grades and strong compact shapes for greater ROP Tricone Bit For Oil Well Drilling With the bearing and leg protection you can consistently drill...

    Contact Now

  • IADC 637 hdd rock reamer bit hole drilling

    IADC 637 hdd rock reamer bit hole drilling

    • Brand: Deris CS TZ JZ

    • Packaging: woode case

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Roller Cone Hdd Hole Opener are used to increase size of well bore and there are two broad categories of Roller Cones Hole Opener fixed diameter hole openers and under reamers Fixed diameter hole openers are usually made up of three cutters arranged around a mandrel and mounted on saddles by strong retaining pins...

    Contact Now

  • 14 3/4 TCI IADC537 tricone bit

    14 3/4 TCI IADC537 tricone bit

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 500 pcs per month

    • Min. Order: 1 Piece/Pieces

    New 14 3 4 TCI rock bit Chisel button Carbide leg and gauge protection 7 5 8 api regular pin In response to the characteristics that inserts in different areas on the cone have different cutting actions conical inserts are placed in permanent contact area and wedge inserts are placed in alternative contact area so...

    Contact Now

  • 190mm IADC217 steel milled tooth tricone bit

    190mm IADC217 steel milled tooth tricone bit

    • Brand: Deris

    • Packaging: wooden case

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO9001

    190mm IADC217 steel milled tooth tricone bit The cost of a good milled steel tooth bit varies from about 1 5 of the total cost however the tricone rock roller bits will affect up to 75 of your total cost Reducing the number of times you trip Increased rate of penetration when drilling means more holes faster...

    Contact Now

  • tci iadc637 tricone rock drill bit

    tci iadc637 tricone rock drill bit

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 50pcs/month

    • Min. Order: 1 Bag/Bags

    tci iadc637 tricone rock drill bit are designed for very hard formations depending on the style and quantity of the carbides on the drill bit because of its versatility and performance it s still one of the main rock bits in use today it is widely used for oil gas water well geotechnical environmental geothermal...

    Contact Now

Review

Sumith Tennakoon

Sep 23, 2019 5

I love it. I've wanted New 14 3 4 Iadc 535 for a long time and this one does not disappoint.
Mrs.kelly L Hickman

Sep 21, 2019 5

This is my second New 14 3 4 Iadc 535 of these.
Rene Proulx

Sep 16, 2019 5

China post air parcel. From receipt of payment before 29 days. Packed well. No damage. Description all-match. Bundle more in line with the order. Gregarious manufacturer.Highly recommend Hejian Deris Petroleum Drilling Equipment Co.,Ltd. company.
  • Video
  • well drilling api standard rock tricone bit iadc517
  • 14 3/4" IADC 537G roller Tricone drill bit
  • iadc 637 tricone rock bit of brand kingdream
  • iadc737 17 1/2 tungsten carbide insert rock bit
  • 9 7/8" IADC 537G tricone insert bit
To fulfill the customers' over-expected fulfillment , we have now our solid staff to deliver our greatest general assistance which includes internet marketing, product sales, creating, manufacturing, excellent controlling, packing, warehousing and logistics for New 14 3 4 Iadc 535 , New 14 3/4 Iadc 535 , 14 3/4 Iadc 535 Tricone Bit , Now we have extensive goods source as well as price tag is our advantage. Welcome to inquire about our products and solutions.
"We keep on with our enterprise spirit of ""Quality, Performance, Innovation and Integrity"". We intention to create far more value for our buyers with our loaded resources, state-of-the-art machinery, experienced workers and great expert services for New 14 3 4 Iadc 535 , New 14 3/4 Iadc 535 , 14 3/4 Iadc 535 Tricone Bit , We pay high attention to customer service and cherish every customer. We have maintained a strong reputation in the industry for many years. We are honest and work on building a long-term relationship with our customers.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.