Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

Replace Bits Cutter - manufacturer, factory, supplier from China

(Total 24 Products for Replace Bits Cutter)

  • 12 1/4" milled tooth tricone bits sealed bearing

    12 1/4" milled tooth tricone bits sealed bearing

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • horizontal directional drilling rock reamer tricone bits

    horizontal directional drilling rock reamer tricone bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drilling is a drilling method that relies on the energy of the drill and the drill to act on the roller bit to break the rock The energy acting on the roller bit by the drill includes the swivel action and the downward thrust The lower thrust is achieved by the gravity of the drill on the roller bit and the hydraulic...

    Contact Now

  • Guide pilot Tri Hawk Drill Bits HDD project

    Guide pilot Tri Hawk Drill Bits HDD project

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • Air Cooling TCI Roller Bearing Tricone Bits

    Air Cooling TCI Roller Bearing Tricone Bits

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Cutting Structure The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit Gauge Structure Multiple gauge protection with gauge trimmers on the heel of cone tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing...

    Contact Now

  • iadc 417 rock drill bits water well rigs

    iadc 417 rock drill bits water well rigs

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • 8.5" tricone bit IADC 537 Replacement roller cones

    8.5" tricone bit IADC 537 Replacement roller cones

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The new tricone drill bit cutters insert extremely high quality tungsten carbide High effectively cutting ability abd strong anti breaking ability which can increase ROP and improve service life of bit effectively sealed journal bearing extend drill tci tricone bit cutter life The bit can achieve longer service life...

    Contact Now

  • tungsten carbide insert 20 inch tci tricone bits

    tungsten carbide insert 20 inch tci tricone bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    The teeth on the cone are divided into two types Tungsten carbide insert teeth and steel Mill teeth The insert teeth is made by drilling a ring gear on the outer tapered surface of the cone and inserting carbide teeth of different sizes and shapes the steel teeth are directly milled from the cone cone The teeth of the...

    Contact Now

  • Drilling Rock Water Well HDD reamer bit cutters

    Drilling Rock Water Well HDD reamer bit cutters

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The new tricone drill bit cutters insert extremely high quality tungsten carbide High effectively cutting ability abd strong anti breaking ability which can increase ROP and improve service life of bit effectively sealed journal bearing extend drill tci tricone bit cutter life The bit can achieve longer service life...

    Contact Now

  • Carbide Material Forging Processing 5 7/8 kingdream bits

    Carbide Material Forging Processing 5 7/8 kingdream bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500pcs/month

    • Min. Order: 1 Piece/Pieces

    Carbide Material Forging Processing kingdream bits The majority of the bits that we recycle are from the mining and energy industries Tricone bit are used in the mining industry to drill blastholes at open pit mines A blasthole is a hole approximately 50 in depth that is drilled and packed with explosive A series of...

    Contact Now

  • Forging Hard Rock Tricone Bits Oil Well Drilling

    Forging Hard Rock Tricone Bits Oil Well Drilling

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 30pcs/week

    • Min. Order: 1 Piece/Pieces

    forging hard rock tricone bits oil well drilling Tricone bit are the workhorses of the drilling industry They can be found in a wide range of applications mining energy water geothermal geotechnical foundation and directional drilling Tricone drill bits are sometimes referred to as rotary bits or rock bits Tricone...

    Contact Now

  • down hole High air pressure rock button bits

    down hole High air pressure rock button bits

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    Convex DTH hammer bit Advantages Our dth bits can transmit intensive impact energy into the rock with the least loss of energy which can help you improve efficiency and reduce costs Product life We select high strength structure alloy steel and carbides with best quality to ensure the drill body and alloy body can...

    Contact Now

  • trenchless drilling tci cone cutter hdd hole opener

    trenchless drilling tci cone cutter hdd hole opener

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 500pcs per year

    • Min. Order: 1 Piece/Pieces

    At some point it may be necessary to increase the size of a pre drilled hole to a larger diameter or to drill large diameter holes Hole opener bits are designed specifically for this purpose Bits are custom manufactured in a wide range of styles to meet field requirements A custom hole opener is an effective way of...

    Contact Now

  • 12 1/4 API TCI tricone bits 311mm

    12 1/4 API TCI tricone bits 311mm

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO9001

    12 1 4 TCI tricone bit IADC537 are designed for soft to very hard formations depending on the style and quantity of the carbides on the TCI tricone bit because of its versatility and performance it s still one of the main tricone bit in use today it is widely used for oil gas water well geotechnical environmental...

    Contact Now

  • 10.5" IADC535 seal bearing Tricone rock bits

    10.5" IADC535 seal bearing Tricone rock bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd provide you High quality Tricone bit Our precision bearings are made with the tightest tolerances in the industry The bearing materials used have extremely low friction and high load capacity We use one of the most chemically resistant heat tolerant HNBR materials for...

    Contact Now

  • insert tricone rock drill roller bits iadc 517

    insert tricone rock drill roller bits iadc 517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Optimal test method for drilling parameters 1 Drill for 5 minutes with initially selected proper WOB and moderate RPM 60 100r min and record the ROP as shown in the table below 2 Moderately increase WOB and keep the same RPM and drill under this WOB for 5 minutes and again record the RPO as shown in the table below 3...

    Contact Now

  • 8-1/2" IADC517 replacement tricone legs /segment drill bit

    8-1/2" IADC517 replacement tricone legs /segment drill bit

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    8 1 2 IADC517 replacement tricone legs segment drill bit The advantage of replacement tricone legs 1 Single cone bit is a bit slow that cone drill bit of speed than the speed of smaller

    Contact Now

  • 14 3/4" tricone bits iadc 637 hard rock

    14 3/4" tricone bits iadc 637 hard rock

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Deris company produce This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formation The HSN rubber O ring provides adequate sealing for bearing durability Bit break in 1 Overusing display instruments when bit approach bottom hole If the WOB and torque increase that...

    Contact Now

  • Trilame tricone drill bit plam replacement

    Trilame tricone drill bit plam replacement

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 1500pcs/month

    • Min. Order: 1 Piece/Pieces

    TrilameTricone bit palm are sophisticated products made from high quality materials steel forging carbide and others These Three Cone plams are designed for a multitude of drilling applications including Gas and Oil production Mining and Mineral Exploration Water Well Construction Horizontal and Directional Geotech...

    Contact Now

  • TCI cutters roller cone hole opener well drilling

    TCI cutters roller cone hole opener well drilling

    • Brand: Deris CS TZ JZ

    • Packaging: woode case

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Hole openers are designed for the enlargement of pilot holes and large hole applications They are also used for road and river crossing application The hole openers are manufactured from AISI 4145H fully heat treated alloy steel All are available with carbide milled teeth and insert cutters Arms and cutters are...

    Contact Now

  • 14 3/4" oil tricone drill head bits

    14 3/4" oil tricone drill head bits

    • Brand: Deris CS TZ JZ

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    Oil Wells Tricone Bit with our reliable elastomer seal are the right choice for conventional applications You can rely on the durable cutting structure with tougher carbide grades and strong compact shapes for greater ROP Tricone Bit For Oil Well Drilling With the bearing and leg protection you can consistently drill...

    Contact Now

  • 8.5 API TCI tricone bits for hard well

    8.5 API TCI tricone bits for hard well

    • Packaging: wooden case or customer requirments

    • Min. Order: 1 Bag/Bags

    • Model No.: IADC537

    • Transportation: Ocean,Land,Air

    Drill appearance inspection and record Check the apparent quality of the roller cone bit threaded connection thread is intact Tungstan carbide roller cone bit whether the mutual bite or Kuang move the weld is intact with a bit gauge cone roller bit diameter 8 1 2 TCI tricone bit are designed for soft to very hard...

    Contact Now

  • diamond insert pdc cutter inserts for drill bit

    diamond insert pdc cutter inserts for drill bit

    • Brand: Deris

    • Supply Ability: 3000 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001

    diamond insert pdc cutter inserts for drill bit PDC cutter consists of polycrystalline diamond layer and tungsten carbide substrate It combines the highest hardness abrasion resistance of diamond and the high shock resistance of tungsten carbide PDC Cutters are widely applied to oilfield drilling gas and geological...

    Contact Now

  • factory good quality tricone rock drill bits

    factory good quality tricone rock drill bits

    • Brand: Deris

    • Packaging: wooden case

    • Min. Order: 1 Bag/Bags

    • Certificate: ISO

    Factory good quality tricone rock drill bits our advantages of Using a Tricone over Other Drill Bits There is a Tricone Rock Drill Bit suitable for any rock formation Inserted tricone bits is versatile and can handle changing formations Tricone rock bits are reasonably priced long lasting and have an efficient...

    Contact Now

  • 8 1/2inch  replaceable tricone bit cutter plam

    8 1/2inch replaceable tricone bit cutter plam

    • Brand: Deris

    • Packaging: wooden case

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO & API

    8 1 2inch replaceable tricone bit cutter plam the advanced metal seal package consists of two metal seats and two elastic energizers Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force and achieve the bearing seal In the drilling metal seal are relatively...

    Contact Now

  • Video
  • trenchless drilling tci cone cutter hdd hole opener
  • Related Information
Innovation, excellent and reliability are the core values of our business. These principles today extra than ever for Replace Bits Cutter , replace bits cutter , 8 1/2 Replaceable Bit Cutter , We sincerely welcome close friends from all over the planet to cooperate with us within the foundation of long-term mutual benefits.
"We stick to our enterprise spirit of ""Quality, Efficiency, Innovation and Integrity"". We aim to create more value for our customers with our rich resources, advanced machinery, experienced workers and excellent services for Replace Bits Cutter , replace bits cutter , 8 1/2 Replaceable Bit Cutter , We would very much welcome an opportunity to do business with you and have pleasure in attaching further details of our solutions. Excellent quality competitive pricespunctual delivery and dependable service can be guaranteed.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.