Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

Rock Tricone Bit - manufacturer, factory, supplier from China

(Total 24 Products for Rock Tricone Bit)

  • Forging Hard Rock Tricone Bits Oil Well Drilling

    Forging Hard Rock Tricone Bits Oil Well Drilling

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 30pcs/week

    • Min. Order: 1 Piece/Pieces

    forging hard rock tricone bits oil well drilling Tricone bit are the workhorses of the drilling industry They can be found in a wide range of applications mining energy water geothermal geotechnical foundation and directional drilling Tricone drill bits are sometimes referred to as rotary bits or rock bits Tricone...

    Contact Now

  • IADC 537 tricone bit Rectangular leg

    IADC 537 tricone bit Rectangular leg

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The Advantages of tricone bit cutters 1 Single cone bit is a bit slow that cone drill bit of speed than the speed of smaller mainly chaotic cutting rock suitable for high speed high pressure drilling wells sidetracking the old old wells deepened so slim hole drilling Applications more widely applicable not only to...

    Contact Now

  • 9 7/8" IADC 537G tricone insert bit

    9 7/8" IADC 537G tricone insert bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd produce well drill tricone bit with Journal bearing Hardfaced head bearing surface Inner hole of cone is silver plated High wear resistance and excellent cutting ability of the tungsten carbide insert bits are given full play by using carbide compacts of high strength...

    Contact Now

  • 14 3/4" IADC 637 tci tricone rock bit

    14 3/4" IADC 637 tci tricone rock bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd produce well drill tricone bit with Journal bearing Hardfaced head bearing surface Preparation before drilling 1 Inspect previous bit for body damage lost cutters or inserts etc Make sure there are no any junk on bottom hole and clean the bottom hole if necessary 2 Bit...

    Contact Now

  • 17 1/2" iadc 517 tci kingdream roller bit

    17 1/2" iadc 517 tci kingdream roller bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Deris company offers new steel tooth and tungsten carbide insert tci tricone bits in sizes from 3 1 2 26 with open or sealed bearings regular or jet circulation and a wide range of additional custom features for ideal performance in any formation Tricone bits can be customized to optimize penetration rates and bit...

    Contact Now

  • 12 1/4" IADC 537G HDD Direct tricone bit

    12 1/4" IADC 537G HDD Direct tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Deris company produce well drilling tricone bit TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection This cutting structure design combined with maximum cone offset results in high bit penetration rates The deep intermesh of cutter rows prevents bit...

    Contact Now

  • 12-1/4 iadc 117 tricone steel tooth bit

    12-1/4 iadc 117 tricone steel tooth bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The advantage of Mill tooth tricone btis 1 High strength high flexibility high temperature high wear resistance 2 High precision metal seal 3 locking roller ball to adapt to high speed 4 The use of high strength hig toughness carbide teeth 5 Hours in the rotary cone bit with the impact crushing and shearing the role...

    Contact Now

  • water well inserted tooth tci tri-cone drill bit

    water well inserted tooth tci tri-cone drill bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Sealed bearing roller bit design Premium HNBR O ring optimal sea compression and curved seal structure can enhance seal performance The pressure compensator system and advanced grease can greatly increase the lubricating reliability Hard Alloy Welding Pervent bit wear and tear work and protect the bearing Hard alloy...

    Contact Now

  • 200mm Sealed bearing tricone roller cone bit

    200mm Sealed bearing tricone roller cone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The tri cone bit is the most versatile drill bit on the market It is the go to drill bit in most styles of drilling Whether you are drilling a water well or an oil well Western drilling tools has the Tri Cone drill bit for you The Advantages of using a tri cone over other drill bitsThere is a tri cone suitable for any...

    Contact Now

  • tci rotary drill tricone bit 8 1/2 inch

    tci rotary drill tricone bit 8 1/2 inch

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    IADC 535 Tricone bit suitable for Medium soft with low compressive strength and harder abrasive stringers such as hard shale hared gypsolyte soft limestone sandstone and dolomite with stringer etc Tri cone bits are versatile and can handle changing formations tricone bit 8 1 2 Are reasonably priced with long life and...

    Contact Now

  • 14 3/4" tricone bits iadc 637 hard rock

    14 3/4" tricone bits iadc 637 hard rock

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Deris company produce This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formation The HSN rubber O ring provides adequate sealing for bearing durability Bit break in 1 Overusing display instruments when bit approach bottom hole If the WOB and torque increase that...

    Contact Now

  • sealed bearing 13 5/8" Milled tooth tricone bit

    sealed bearing 13 5/8" Milled tooth tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The advantage of Mill tooth tricone btis Journal bearing Hardfaced head bearing surface Cone bearing inlaid with friction reducing alloy and then silver plated The load capacity and seizure resistance of the bearing is greatly improved For steel tooth bit the tooth surface is hardfaced with new type of wear resistan...

    Contact Now

  • insert tricone rock drill roller bits iadc 517

    insert tricone rock drill roller bits iadc 517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Optimal test method for drilling parameters 1 Drill for 5 minutes with initially selected proper WOB and moderate RPM 60 100r min and record the ROP as shown in the table below 2 Moderately increase WOB and keep the same RPM and drill under this WOB for 5 minutes and again record the RPO as shown in the table below 3...

    Contact Now

  • 17 1/2 tci tricone rock roller drilling bit

    17 1/2 tci tricone rock roller drilling bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Corrective actions for bit balling are 1 Pick up off approximately half meter and circulate for 10 to 15 minutes with full flow 2 The bit was swiveled by using different means according to drill rig Waste matters adhered on the surface of a bit threw off by using centrifugation Corrective actions for bit bouncing are...

    Contact Now

  • tci rock tricone bits for drilling water well

    tci rock tricone bits for drilling water well

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Precautions for the use of tricone drill bit Precautions for the use of tricone drill bit 1 Roller bit preparation According to the geological prediction of the well the use of the adjacent well cone bit and the upper drill bit refer to the drilling engineering design and choose the type and model of the roller bit...

    Contact Now

  • oilfield hard rock tricone drill head bit

    oilfield hard rock tricone drill head bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drilling is a drilling method that relies on the energy of the rotary rock bit and the drill to act on the roller bit to break the rock The energy acting on the tci tricone roller drill bit by the drill includes the swivel action and the downward thrust The lower thrust is achieved by the gravity of the drill on the...

    Contact Now

  • horizontal directional drilling rock reamer tricone bits

    horizontal directional drilling rock reamer tricone bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drilling is a drilling method that relies on the energy of the drill and the drill to act on the roller bit to break the rock The energy acting on the roller bit by the drill includes the swivel action and the downward thrust The lower thrust is achieved by the gravity of the drill on the roller bit and the hydraulic...

    Contact Now

  • hard rock roller cones for rotary drilling engineering

    hard rock roller cones for rotary drilling engineering

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    hard rock roller cones for rotary drilling engineering Model name IADC537 216mm tricone bit

    Contact Now

  • gauge protection 295mm hard rock drill tricone bit

    gauge protection 295mm hard rock drill tricone bit

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Hard Formation TCI Bits For hard sandstones granites dolomites quartzite and pyrites These Tricone Bits are designed to withstand high loads and drill abrasive conditions where rock is broken under high compressive point loads with little scraping and gouging Therefore the cutting elements tend to be small exhibit...

    Contact Now

  • 6" 152mm alloy steel drilling step drag bit

    6" 152mm alloy steel drilling step drag bit

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris supplies a variety of drag bits for many types of projects drilling needs including 3 wing type bits for soft and medium formations 4 wing especially 4 wing chevron type for harder formations Each of our bits is machined from a forging to exacting standards and then tipped with tungsten carbide Mining...

    Contact Now

  • Mill tooth tricone drill rock bits

    Mill tooth tricone drill rock bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The advantage of steel tooth tricone bit 1 High strength high flexibility high temperature high wear resistance 2 High precision metal seal 3 locking roller ball to adapt to high speed 4 The use of high strength hig toughness carbide teeth 5 Hours in the rotary cone bit with the impact crushing and shearing the role...

    Contact Now

  • Horizontal Directional Drilling Pilot Guide Bit for well

    Horizontal Directional Drilling Pilot Guide Bit for well

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • Guide pilot Tri Hawk Drill Bits HDD project

    Guide pilot Tri Hawk Drill Bits HDD project

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • well drilling api standard rock tricone bit iadc517

    well drilling api standard rock tricone bit iadc517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The cost of a good drill bit varies from about 1 to 5 of the total cost but the drill bit will affect up to 75 of your total cost The right drill bit for the right job gives the advantages of Reducing the number of times you trip Increased rate of penetration when drilling means more holes faster Straighter holes and...

    Contact Now

Review

Enis Büyük

Sep 25, 2019 5

Recommend this Rock Tricone Bit manufacturer!!
Peter Sinkala

Sep 23, 2019 5

The manufacturer of the Rock Tricone Bit with the good manner. I’m so satisfied with it! Good!
Jimy Cabrera

Sep 23, 2019 5

The Rock Tricone Bit price is favorable for me.And with excellent use effect.
  • Video
  • 9 7/8" IADC 537G tricone insert bit
  • 14 3/4" IADC 637 tci tricone rock bit
  • water well inserted tooth tci tri-cone drill bit
  • oilfield hard rock tricone drill head bit
  • well drilling api standard rock tricone bit iadc517
  • Related Information
We'll make each individual effort to become exceptional and ideal, and speed up our steps for standing inside the rank of worldwide top-grade and high-tech enterprises for Rock Tricone Bit , Hard Rock Tricone Bit , Hard Rock Tricone Bits , our company is your best choice. Warmly welcome you and opening up the boundaries of communication. We are the ideal partner of your business development and look forward to your sincere cooperation.
Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for Rock Tricone Bit , Hard Rock Tricone Bit , Hard Rock Tricone Bits , Faced with the vitality of the global wave of economic integration we've been confident with our high-quality merchandise and sincerely service to all our customers and wish we can cooperate with you to create a brilliant future.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.