Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

Roller Bits Iadc 517 - manufacturer, factory, supplier from China

(Total 24 Products for Roller Bits Iadc 517)

  • insert tricone rock drill roller bits iadc 517

    insert tricone rock drill roller bits iadc 517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Optimal test method for drilling parameters 1 Drill for 5 minutes with initially selected proper WOB and moderate RPM 60 100r min and record the ROP as shown in the table below 2 Moderately increase WOB and keep the same RPM and drill under this WOB for 5 minutes and again record the RPO as shown in the table below 3...

    Contact Now

  • 12 1/4" milled tooth tricone bits sealed bearing

    12 1/4" milled tooth tricone bits sealed bearing

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • Kingdream 9 7/8" iadc127 steel tooth tricone bit

    Kingdream 9 7/8" iadc127 steel tooth tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris a professional company in supplying tricone bits steel teeth bits single cone bits and PDC bits Bits sizes range from 3 7 8 to 26 and cover almost all IADC codes It can be used in various of different fields mining hydrology subterranean heatpilling water well drilling and oil well drilling This type of...

    Contact Now

  • horizontal directional drilling rock reamer tricone bits

    horizontal directional drilling rock reamer tricone bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drilling is a drilling method that relies on the energy of the drill and the drill to act on the roller bit to break the rock The energy acting on the roller bit by the drill includes the swivel action and the downward thrust The lower thrust is achieved by the gravity of the drill on the roller bit and the hydraulic...

    Contact Now

  • Guide pilot Tri Hawk Drill Bits HDD project

    Guide pilot Tri Hawk Drill Bits HDD project

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • 15 1/2" IADC 537 Medium hard rock bit

    15 1/2" IADC 537 Medium hard rock bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd produce well drill tricone bit with Journal bearing Hardfaced head bearing surface Inner hole of cone is silver plated The load capacity and seizure resistance of the bearing is greatly improved O ring seal is made of the more wear resistance high saturated buna N with...

    Contact Now

  • oil well roller cone steel tooth tricone bit

    oil well roller cone steel tooth tricone bit

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Basical Specification product name 11 5 8 inch IADC 117 steel tooth tricone drilling

    Contact Now

  • Air Cooling TCI Roller Bearing Tricone Bits

    Air Cooling TCI Roller Bearing Tricone Bits

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Cutting Structure The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit Gauge Structure Multiple gauge protection with gauge trimmers on the heel of cone tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing...

    Contact Now

  • well drilling api standard rock tricone bit iadc517

    well drilling api standard rock tricone bit iadc517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The cost of a good drill bit varies from about 1 to 5 of the total cost but the drill bit will affect up to 75 of your total cost The right drill bit for the right job gives the advantages of Reducing the number of times you trip Increased rate of penetration when drilling means more holes faster Straighter holes and...

    Contact Now

  • iadc 417 rock drill bits water well rigs

    iadc 417 rock drill bits water well rigs

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • Hard Rock Core Barrel With Roller Cone bit

    Hard Rock Core Barrel With Roller Cone bit

    • Brand: Deris, Lilin,CS,TZ ,JZ

    • Packaging: wooden case

    • Supply Ability: 300 pcs per year

    • Min. Order: 1 Piece/Pieces

    Rock Drilling Core Barrels with Roller Bits adopt the high carbon steel and special drilling bits angle to keep the drilling strength and efficiency There are tree types of core barrels 1 Core barrel with bullet teeth is used for cutting an annular ring in rock or concrete also reinforced concrete 2 Core barrel with...

    Contact Now

  • IADC 637 tricone bit palm single roller cones

    IADC 637 tricone bit palm single roller cones

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Reliable and stable sealing structure metal sea and rubber seal optional The Tricone Bit palm bearing surface is hard coated with hard allor layer and the roller bearing is silver plated which improves the bearing capacity and the resistance to seizure Adopt hight toughness carbide teeth to improve the impact...

    Contact Now

  • 8.5" tricone bit IADC 537 Replacement roller cones

    8.5" tricone bit IADC 537 Replacement roller cones

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The new tricone drill bit cutters insert extremely high quality tungsten carbide High effectively cutting ability abd strong anti breaking ability which can increase ROP and improve service life of bit effectively sealed journal bearing extend drill tci tricone bit cutter life The bit can achieve longer service life...

    Contact Now

  • 17 1/2 tci tricone rock roller drilling bit

    17 1/2 tci tricone rock roller drilling bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Corrective actions for bit balling are 1 Pick up off approximately half meter and circulate for 10 to 15 minutes with full flow 2 The bit was swiveled by using different means according to drill rig Waste matters adhered on the surface of a bit threw off by using centrifugation Corrective actions for bit bouncing are...

    Contact Now

  • tungsten carbide insert 20 inch tci tricone bits

    tungsten carbide insert 20 inch tci tricone bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    The teeth on the cone are divided into two types Tungsten carbide insert teeth and steel Mill teeth The insert teeth is made by drilling a ring gear on the outer tapered surface of the cone and inserting carbide teeth of different sizes and shapes the steel teeth are directly milled from the cone cone The teeth of the...

    Contact Now

  • 14 3/4" IADC 537G roller Tricone drill bit

    14 3/4" IADC 537G roller Tricone drill bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Why roller cone drill the most widely used Due to impact crushing and shearing rock breaking when roller cone rotates the contact area between cone and bottom hole is small the specific pressure is high the working torque is small and the working blade has a large total length and can be suitable for rock of various...

    Contact Now

  • iadc 637 tricone rock bit of brand kingdream

    iadc 637 tricone rock bit of brand kingdream

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations The HSN rubber O ring provides adequate sealing for bearing durability...

    Contact Now

  • iadc737 17 1/2 tungsten carbide insert rock bit

    iadc737 17 1/2 tungsten carbide insert rock bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Get more power Use less fluid Rock It Mud Motors convert drill fluid pressure into maximum torque so you get more drilling time before stopping for maintenance It s not magic When you driling well Please select the applicable formation and parameters according to the instructions Carefully check the roller cone bit...

    Contact Now

  • Carbide Material Forging Processing 5 7/8 kingdream bits

    Carbide Material Forging Processing 5 7/8 kingdream bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500pcs/month

    • Min. Order: 1 Piece/Pieces

    Carbide Material Forging Processing kingdream bits The majority of the bits that we recycle are from the mining and energy industries Tricone bit are used in the mining industry to drill blastholes at open pit mines A blasthole is a hole approximately 50 in depth that is drilled and packed with explosive A series of...

    Contact Now

  • 14 3/4 iadc535 roller bearing tci tricone bit

    14 3/4 iadc535 roller bearing tci tricone bit

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO9001

    new 14 3 4 iadc 535 roller bearing tricone bit We offers a variety of tricones from sealed bearing button TCI bits to open bearing steel tooth tricone bit in a wide range of sizes in new rebuilt and unused surplus The bearings are what make the cones on a Tricone spin There are four common types of bearings standard...

    Contact Now

  • Forging Hard Rock Tricone Bits Oil Well Drilling

    Forging Hard Rock Tricone Bits Oil Well Drilling

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 30pcs/week

    • Min. Order: 1 Piece/Pieces

    forging hard rock tricone bits oil well drilling Tricone bit are the workhorses of the drilling industry They can be found in a wide range of applications mining energy water geothermal geotechnical foundation and directional drilling Tricone drill bits are sometimes referred to as rotary bits or rock bits Tricone...

    Contact Now

  • down hole High air pressure rock button bits

    down hole High air pressure rock button bits

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    Convex DTH hammer bit Advantages Our dth bits can transmit intensive impact energy into the rock with the least loss of energy which can help you improve efficiency and reduce costs Product life We select high strength structure alloy steel and carbides with best quality to ensure the drill body and alloy body can...

    Contact Now

  • 9 7/8" IADC 537G tricone insert bit

    9 7/8" IADC 537G tricone insert bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd produce well drill tricone bit with Journal bearing Hardfaced head bearing surface Inner hole of cone is silver plated High wear resistance and excellent cutting ability of the tungsten carbide insert bits are given full play by using carbide compacts of high strength...

    Contact Now

  • 12 1/4" steel tooth tricone rock roller bit

    12 1/4" steel tooth tricone rock roller bit

    • Brand: Deris

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    IADC CODE TRICOEN BITS First Digit 1 2 3 designate steel tooth bits and the formation being drilled with 1 for soft 2 for medium and 3 for hard formations 4 5 6 7 and 8 designate tungsten carbide insert bits and the formation being drilled with 4 being the softest and 8 the hardest formation Second Digit 1 2 3 and 4...

    Contact Now

Review

Tracy Shen

Sep 28, 2019 5

I am glad to have chosen you. Thx Hejian Deris Petroleum Drilling Equipment Co.,Ltd. .
Joyce Noerr

Sep 24, 2019 5

The Roller Bits Iadc 517 price is reasonable. Looking forward to the next cooperation
Jimmi Sanusi

Sep 21, 2019 5

This Roller Bits Iadc 517 has a good quality. Recommend to you all!
  • Video
  • oil well roller cone steel tooth tricone bit
  • well drilling api standard rock tricone bit iadc517
  • 14 3/4" IADC 537G roller Tricone drill bit
  • iadc 637 tricone rock bit of brand kingdream
  • iadc737 17 1/2 tungsten carbide insert rock bit
  • 9 7/8" IADC 537G tricone insert bit
  • Related Information
Our improvement depends on the superior equipment, excellent talents and continuously strengthened technology forces for Roller Bits Iadc 517 , Tricone Bit Iadc517 , Tricone Bits Iadc 637 , We invites both you and your company to prosper together with us and share a brilliant long run in worldwide market place.
The very rich projects management experiences and one to one service model make the high importance of business communication and our easy understanding of your expectations for Roller Bits Iadc 517 , Tricone Bit Iadc517 , Tricone Bits Iadc 637 , If any product meed your demand remember to feel free to contact us. We're sure your any inquiry or requirement will get prompt attention high-quality merchandise preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit to discuss cooperation for a better future!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.