Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

Smith Hammer Bits - manufacturer, factory, supplier from China

(Total 24 Products for Smith Hammer Bits)

  • 12 1/4" milled tooth tricone bits sealed bearing

    12 1/4" milled tooth tricone bits sealed bearing

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • horizontal directional drilling rock reamer tricone bits

    horizontal directional drilling rock reamer tricone bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drilling is a drilling method that relies on the energy of the drill and the drill to act on the roller bit to break the rock The energy acting on the roller bit by the drill includes the swivel action and the downward thrust The lower thrust is achieved by the gravity of the drill on the roller bit and the hydraulic...

    Contact Now

  • Guide pilot Tri Hawk Drill Bits HDD project

    Guide pilot Tri Hawk Drill Bits HDD project

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • High Air Pressure DTH Hammer Drill Button Bit

    High Air Pressure DTH Hammer Drill Button Bit

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    Advantages of DTH hammer and Bit Reliability Piston uses the special imported high nickel alloy steel with advanced heat treatment as military industry standard Strengthening processing on hammer surface for higher wear resistance Suitability Specially designed drill bits for medium soft and hard rock formations...

    Contact Now

  • Air Cooling TCI Roller Bearing Tricone Bits

    Air Cooling TCI Roller Bearing Tricone Bits

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Cutting Structure The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit Gauge Structure Multiple gauge protection with gauge trimmers on the heel of cone tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing...

    Contact Now

  • iadc 417 rock drill bits water well rigs

    iadc 417 rock drill bits water well rigs

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • Durable High Air Pressure DTH drilling hammer

    Durable High Air Pressure DTH drilling hammer

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    Product Application DTH drilling tool is widely used in underground mining quarries hydraulic and Hydro Power Engineering water well drilling Mineral exploration anchoring hole drilling geothermal engineering Subway excavation another civil engineering it has the advantage of high flatness smooth hole wall high rigid...

    Contact Now

  • tungsten carbide insert 20 inch tci tricone bits

    tungsten carbide insert 20 inch tci tricone bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500 pcs / month

    • Min. Order: 1 Bag/Bags

    The teeth on the cone are divided into two types Tungsten carbide insert teeth and steel Mill teeth The insert teeth is made by drilling a ring gear on the outer tapered surface of the cone and inserting carbide teeth of different sizes and shapes the steel teeth are directly milled from the cone cone The teeth of the...

    Contact Now

  • Carbide Material Forging Processing 5 7/8 kingdream bits

    Carbide Material Forging Processing 5 7/8 kingdream bits

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 500pcs/month

    • Min. Order: 1 Piece/Pieces

    Carbide Material Forging Processing kingdream bits The majority of the bits that we recycle are from the mining and energy industries Tricone bit are used in the mining industry to drill blastholes at open pit mines A blasthole is a hole approximately 50 in depth that is drilled and packed with explosive A series of...

    Contact Now

  • Forging Hard Rock Tricone Bits Oil Well Drilling

    Forging Hard Rock Tricone Bits Oil Well Drilling

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Supply Ability: 30pcs/week

    • Min. Order: 1 Piece/Pieces

    forging hard rock tricone bits oil well drilling Tricone bit are the workhorses of the drilling industry They can be found in a wide range of applications mining energy water geothermal geotechnical foundation and directional drilling Tricone drill bits are sometimes referred to as rotary bits or rock bits Tricone...

    Contact Now

  • down hole High air pressure rock button bits

    down hole High air pressure rock button bits

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    Convex DTH hammer bit Advantages Our dth bits can transmit intensive impact energy into the rock with the least loss of energy which can help you improve efficiency and reduce costs Product life We select high strength structure alloy steel and carbides with best quality to ensure the drill body and alloy body can...

    Contact Now

  • 12 1/4 API TCI tricone bits 311mm

    12 1/4 API TCI tricone bits 311mm

    • Brand: Deris

    • Packaging: wooden case or customer requirments

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO9001

    12 1 4 TCI tricone bit IADC537 are designed for soft to very hard formations depending on the style and quantity of the carbides on the TCI tricone bit because of its versatility and performance it s still one of the main tricone bit in use today it is widely used for oil gas water well geotechnical environmental...

    Contact Now

  • 10.5" IADC535 seal bearing Tricone rock bits

    10.5" IADC535 seal bearing Tricone rock bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris Petroleum Drilling Equipment Co Ltd provide you High quality Tricone bit Our precision bearings are made with the tightest tolerances in the industry The bearing materials used have extremely low friction and high load capacity We use one of the most chemically resistant heat tolerant HNBR materials for...

    Contact Now

  • insert tricone rock drill roller bits iadc 517

    insert tricone rock drill roller bits iadc 517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Optimal test method for drilling parameters 1 Drill for 5 minutes with initially selected proper WOB and moderate RPM 60 100r min and record the ROP as shown in the table below 2 Moderately increase WOB and keep the same RPM and drill under this WOB for 5 minutes and again record the RPO as shown in the table below 3...

    Contact Now

  • 14 3/4" tricone bits iadc 637 hard rock

    14 3/4" tricone bits iadc 637 hard rock

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Deris company produce This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formation The HSN rubber O ring provides adequate sealing for bearing durability Bit break in 1 Overusing display instruments when bit approach bottom hole If the WOB and torque increase that...

    Contact Now

  • 14 3/4" oil tricone drill head bits

    14 3/4" oil tricone drill head bits

    • Brand: Deris CS TZ JZ

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    Oil Wells Tricone Bit with our reliable elastomer seal are the right choice for conventional applications You can rely on the durable cutting structure with tougher carbide grades and strong compact shapes for greater ROP Tricone Bit For Oil Well Drilling With the bearing and leg protection you can consistently drill...

    Contact Now

  • 8.5 API TCI tricone bits for hard well

    8.5 API TCI tricone bits for hard well

    • Packaging: wooden case or customer requirments

    • Min. Order: 1 Bag/Bags

    • Model No.: IADC537

    • Transportation: Ocean,Land,Air

    Drill appearance inspection and record Check the apparent quality of the roller cone bit threaded connection thread is intact Tungstan carbide roller cone bit whether the mutual bite or Kuang move the weld is intact with a bit gauge cone roller bit diameter 8 1 2 TCI tricone bit are designed for soft to very hard...

    Contact Now

  • factory good quality tricone rock drill bits

    factory good quality tricone rock drill bits

    • Brand: Deris

    • Packaging: wooden case

    • Min. Order: 1 Bag/Bags

    • Certificate: ISO

    Factory good quality tricone rock drill bits our advantages of Using a Tricone over Other Drill Bits There is a Tricone Rock Drill Bit suitable for any rock formation Inserted tricone bits is versatile and can handle changing formations Tricone rock bits are reasonably priced long lasting and have an efficient...

    Contact Now

  • Hard Rock 617 TCI Roller Tricone Drill Bits

    Hard Rock 617 TCI Roller Tricone Drill Bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Steel teeth or carbide inserts come in a variety of shapes sizes and grades of tungsten carbides to address specific drilling conditions TCI bits offer increased durability over steel tooth bits but also carry a higher cost Open bearing bits feature bearings without a seal that are open to outside debris Open bearing...

    Contact Now

  • SD6 Mission High Air Pressure DTH Hammer

    SD6 Mission High Air Pressure DTH Hammer

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    SD6 Mission High Air Pressure DTH Hammer we have served a number of large mining projects including blast holes anchoring geothermal bore holes quarring well drilling and accumulated a wealth of practical experience And Our DTH hammer can be used in different types of drilling machine Air Pressure DTH Hammer advantage...

    Contact Now

  • 9 1/2 rubber sealing ring tci tricone bits

    9 1/2 rubber sealing ring tci tricone bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The Tungsten carbide insert bits shown here are rebuilt All have the total original number of inserts Seals are tight and have been re greased and painted The tooth bits have been re tipped to original factory specifications tricone bits to meet your customized drilling needs We have classified the bits based on their...

    Contact Now

  • Mill tooth tricone drill rock bits

    Mill tooth tricone drill rock bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The advantage of steel tooth tricone bit 1 High strength high flexibility high temperature high wear resistance 2 High precision metal seal 3 locking roller ball to adapt to high speed 4 The use of high strength hig toughness carbide teeth 5 Hours in the rotary cone bit with the impact crushing and shearing the role...

    Contact Now

  • Qualified High Air Pressure DHD350 DTH drilling Hammer

    Qualified High Air Pressure DHD350 DTH drilling Hammer

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    The cylinders pistons and other spares is made of quality alloy steel with heat treatment Valveless air distribution More reliable Simple design of the piston Long life More efficient energy transfer fact drilling speed lower air consumption and lower oil consumption Fewer internal parts simple structure long life...

    Contact Now

  • 9 1/2" hammer water Well Button drill Bits

    9 1/2" hammer water Well Button drill Bits

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 30 pcs per month

    • Min. Order: 1 Piece/Pieces

    We also supply 3 4 5 6 8 10 12 etc High Pressure DTH Air Drill Hammers and various matched drill bits We offer high air pressure DTH hammer size from 3 to 12 71mm 275mm DTH hammer perform good in drilling well of diameter from 85mm to 600mm especially excellent in deep hole well drilling works Different designing...

    Contact Now

Review

Md. Abdul Tahid Mojumder

Sep 22, 2019 5

This Smith Hammer Bits is extremely well and received very fast.
Nisar Muhammad

Sep 21, 2019 5

Soooo NICE!
Jessica Fleck

Sep 12, 2019 4

Great quality!
  • Related Information
"The organization keeps for the procedure concept ""scientific administration, superior quality and effectiveness primacy, shopper supreme for Smith Hammer Bits , smith hammer bits , dth hammer bits , Our products and solutions are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.