Communicate with Supplier? Supplier
Jenny Ms. Jenny
What can I do for you?
Contact Supplier

Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

Tricone Bits For Drilling - manufacturer, factory, supplier from China

(Total 24 Products for Tricone Bits For Drilling)

  • diamond cutter pdc non-core drill bits

    diamond cutter pdc non-core drill bits

    • Brand: Deris

    • Packaging: wooden case

    • Supply Ability: 150 PCS per Quarter

    • Min. Order: 1 Piece/Pieces

    Preparation before drilling 1 Inspect previous bit for body damage lost cutters or inserts etc Make sure there are no any junk on bottom hole and clean the bottom hole if necessary 2 Bit must be handled with care in order not no damage cutters and hard substances 3 Check if there is any damage on bit cutters and if...

    Contact Now

  • 12 1/4" steel tooth tricone rock roller bit

    12 1/4" steel tooth tricone rock roller bit

    • Brand: Deris

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    IADC CODE TRICOEN BITS First Digit 1 2 3 designate steel tooth bits and the formation being drilled with 1 for soft 2 for medium and 3 for hard formations 4 5 6 7 and 8 designate tungsten carbide insert bits and the formation being drilled with 4 being the softest and 8 the hardest formation Second Digit 1 2 3 and 4...

    Contact Now

  • Soft Rock Drilling TZ steel teeth roller bit

    Soft Rock Drilling TZ steel teeth roller bit

    • Brand: Deris

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    milled tooth tricone Roller Cone Bits for water well drilling Brief introduction There are a normal three cone Bits that have been used for drilling Oil wells for decades There are many types to use from soft formation low compressive strength to extremely hard and abrasive formation from roller bearing air cooled to...

    Contact Now

  • tci rock tricone bits for drilling water well

    tci rock tricone bits for drilling water well

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Precautions for the use of tricone drill bit Precautions for the use of tricone drill bit 1 Roller bit preparation According to the geological prediction of the well the use of the adjacent well cone bit and the upper drill bit refer to the drilling engineering design and choose the type and model of the roller bit...

    Contact Now

  • api water well drilling 26" roller tricone bit

    api water well drilling 26" roller tricone bit

    • Brand: Deris

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    IADC CODE TRICOEN BITS First Digit 1 2 3 designate steel tooth bits and the formation being drilled with 1 for soft 2 for medium and 3 for hard formations 4 5 6 7 and 8 designate tungsten carbide insert bits and the formation being drilled with 4 being the softest and 8 the hardest formation Second Digit 1 2 3 and 4...

    Contact Now

  • horizontal directional drilling rock reamer bit

    horizontal directional drilling rock reamer bit

    • Brand: Deris CS TZ JZ

    • Packaging: woode case

    • Supply Ability: 300 pcs per year

    • Min. Order: 1 Piece/Pieces

    The Hole Opener Advantage Straighter Holes By drilling a smaller hole with a pilot bit then attaching that said bit onto the bottom of the the hole opener The hole opener will follow the path of the hole drilled by the smaller bit Larger Holes with Smaller Rigs By drilling a hole in stages larger holes can be drilled...

    Contact Now

  • 22 inch Drilling tool HDD reamer pilot BIT

    22 inch Drilling tool HDD reamer pilot BIT

    • Brand: Deris CS TZ JZ

    • Packaging: woode case

    • Supply Ability: 300 pcs per year

    • Min. Order: 1 Piece/Pieces

    The Hole Opener Advantage Straighter Holes By drilling a smaller hole with a pilot bit then attaching that said bit onto the bottom of the the hole opener The hole opener will follow the path of the hole drilled by the smaller bit Larger Holes with Smaller Rigs By drilling a hole in stages larger holes can be drilled...

    Contact Now

  • 444.5mm 17 1/2" GAT135 steel tooth tricone bits

    444.5mm 17 1/2" GAT135 steel tooth tricone bits

    • Brand: Deris

    • Packaging: 1pc tricone bit per wooden case

    • Supply Ability: 300 pc/ Month

    • Min. Order: 1 Piece/Pieces

    GAT series bit adopts rubber seal with roller Bearing which is the ideal and economical tool for drilling applications where middle to low WOB and high RPM are required Main structure features 1 Sealed roller bearing structure With roller arranged in grooves recessed in the cone body the size of the bearing journal is...

    Contact Now

  • 8 1/2 ha steel tooth tricone drill bit

    8 1/2 ha steel tooth tricone drill bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • 12 1/4" milled tooth tricone bits sealed bearing

    12 1/4" milled tooth tricone bits sealed bearing

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • Kingdream 9 7/8" iadc127 steel tooth tricone bit

    Kingdream 9 7/8" iadc127 steel tooth tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Hejian Deris a professional company in supplying tricone bits steel teeth bits single cone bits and PDC bits Bits sizes range from 3 7 8 to 26 and cover almost all IADC codes It can be used in various of different fields mining hydrology subterranean heatpilling water well drilling and oil well drilling This type of...

    Contact Now

  • horizontal directional drilling rock reamer tricone bits

    horizontal directional drilling rock reamer tricone bits

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    Drilling is a drilling method that relies on the energy of the drill and the drill to act on the roller bit to break the rock The energy acting on the roller bit by the drill includes the swivel action and the downward thrust The lower thrust is achieved by the gravity of the drill on the roller bit and the hydraulic...

    Contact Now

  • Guide pilot Tri Hawk Drill Bits HDD project

    Guide pilot Tri Hawk Drill Bits HDD project

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • Horizontal Directional Drilling Pilot Guide Bit for well

    Horizontal Directional Drilling Pilot Guide Bit for well

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The directional drill head is mainly comprised of directional body and drilling head plate The directional body is equipped with signal stick and the drilling head plate is made of steel plate This kind of directional drill head is mainly used in the first procedure of pipe laying drill work The straightness of pilot...

    Contact Now

  • 500mm hdd drilling reamer bit

    500mm hdd drilling reamer bit

    • Brand: Deris CS TZ JZ

    • Packaging: woode case

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Hole opener includes body and the cutter 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes Cutter can be divided into MT type used in soft formation and TCI type used in hard formation Hole opener takes its advantages in its better teeth distribution wearing...

    Contact Now

  • hole opener hdd pdc reamer bit no-dig drilling

    hole opener hdd pdc reamer bit no-dig drilling

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    Hole opener Large diameter assembled bit is widely used in construction bridge highway and railway construction This series of bits are suitable to various kinds of strata including shale limestone cobblestone dolomite and conglomerate 1 Suitable for medium to medium hard formation of high Crushing Resistance hard...

    Contact Now

  • River crossing horizontal drilling HDD PDC hole opener

    River crossing horizontal drilling HDD PDC hole opener

    • Brand: Deris

    • Packaging: Wooden case

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    Hole opener Large diameter assembled bit is widely used in construction bridge highway and railway construction This series of bits are suitable to various kinds of strata including shale limestone cobblestone dolomite and conglomerate 1 Suitable for medium to medium hard formation of high Crushing Resistance hard...

    Contact Now

  • oil well roller cone steel tooth tricone bit

    oil well roller cone steel tooth tricone bit

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Basical Specification product name 11 5 8 inch IADC 117 steel tooth tricone drilling

    Contact Now

  • Air Cooling TCI Roller Bearing Tricone Bits

    Air Cooling TCI Roller Bearing Tricone Bits

    • Brand: Deris, Lilin,CS,TZ ,JZ,

    • Packaging: wooden case package

    • Supply Ability: 300 pcs per month

    • Min. Order: 1 Piece/Pieces

    Cutting Structure The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit Gauge Structure Multiple gauge protection with gauge trimmers on the heel of cone tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing...

    Contact Now

  • sealed bearing 13 5/8" Milled tooth tricone bit

    sealed bearing 13 5/8" Milled tooth tricone bit

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300 pieces per month

    • Min. Order: 1 Piece/Pieces

    The advantage of Mill tooth tricone btis Journal bearing Hardfaced head bearing surface Cone bearing inlaid with friction reducing alloy and then silver plated The load capacity and seizure resistance of the bearing is greatly improved For steel tooth bit the tooth surface is hardfaced with new type of wear resistan...

    Contact Now

  • tci tricone rock bit for oil drill

    tci tricone rock bit for oil drill

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    Tricone bit Bearing Structure Non sealed roller bearing Drilling fluid can enter the bearing directly for cooling Balls lock the cone which reduces the probability of cone Cdropping to minimum Main Type Available The president is issuing Tricone bit edicts Congressional representatives are falling over themselves...

    Contact Now

  • well drilling api standard rock tricone bit iadc517

    well drilling api standard rock tricone bit iadc517

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    The cost of a good drill bit varies from about 1 to 5 of the total cost but the drill bit will affect up to 75 of your total cost The right drill bit for the right job gives the advantages of Reducing the number of times you trip Increased rate of penetration when drilling means more holes faster Straighter holes and...

    Contact Now

  • iadc 417 rock drill bits water well rigs

    iadc 417 rock drill bits water well rigs

    • Brand: DERIS

    • Packaging: 1 pc wooden case each bit

    • Supply Ability: 300pieces per month

    • Min. Order: 1 Piece/Pieces

    TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS Soft rock formations consist mainly of sand clay limestone or shale and are ideal for drilling with Mill Tooth Tricone bits When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits depending on the scope and duration of your...

    Contact Now

  • 8inch 6 blades Matrix body PDC drilling bit

    8inch 6 blades Matrix body PDC drilling bit

    • Supply Ability: 300 pcs per quarter

    • Min. Order: 1 Piece/Pieces

    • Certificate: ISO 9001

    • Model No.: M 323

    8inch Polycrystalline diamond compact PDC drill bits deliver premium performance and durability for a wide range of standard drilling applications These matrix and steel bodied bits incorporate the latest cutter technology computational fluid dynamics CFD enhanced hydraulics and various structure geometries to...

    Contact Now

Review

Chen Jie

Jan 27, 2020 5

Very quickly delivery, and the Tricone Bits For Drilling is exactly what I am looking for. Thanks a lot.
David Cheng

Jan 23, 2020 5

Got it, delivered pretty fast. Everything seems fine.
Heather Conlee

Jan 20, 2020 5

Went through tons of reviews for all Tricone Bits For Drilling on the market, and choose ultimately this one, great choice!
  • Video
  • oil well roller cone steel tooth tricone bit
  • well drilling api standard rock tricone bit iadc517
  • Related Information
To fulfill the customers' over-expected satisfaction , we have now our strong crew to provide our greatest general assistance which incorporates promoting, gross sales, planning, creation, top quality controlling, packing, warehousing and logistics for Tricone Bits For Drilling , Tricone Bits for Oil Drilling , Tricone Bit for Oil Drilling , we already have a lot of shops in China and our solutions have won praise from consumers globally. Welcome new and outdated consumers to make contact with us for your future long-lasting company associations.
"With state-of-the-art technologies and facilities, strict high-quality management, reasonable price tag, top-quality service and close co-operation with clients, we're devoted to delivering the top value for our consumers for Tricone Bits For Drilling , Tricone Bits for Oil Drilling , Tricone Bit for Oil Drilling , Our products have national accreditation requirements for qualified high quality merchandise affordable value was welcomed by people today all over the world. Our goods will continue to enhance within the order and look forward to cooperation with you Must any of these merchandise be of curiosity to you please letus know. We are going to be content to provide you a quotation up on receipt of your detailed needs.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.