Hejian Deris Petroleum Drilling Equipment Co.,Ltd.

Products

Home > Products > PDC BitMatrix Body PDC Bit

Matrix Body PDC Bit

View :

    • 8inch 6 blades Matrix body PDC drilling bit
    • 8inch 6 blades Matrix body PDC drilling bit
    • 8inch 6 blades Matrix body PDC drilling bit
    • 8inch 6 blades Matrix body PDC drilling bit
    • 8inch 6 blades Matrix body PDC drilling bit

    8inch 6 blades Matrix body PDC drilling bit

    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    • Model No.: M 323
    • Productivity: 30 pcs / week
    8inch Polycrystalline diamond compact (PDC) drill bits deliver premium performance and durability for a wide range of standard drilling applications. These matrix- and steel-bodied bits incorporate the latest cutter technology, computational fluid dynamics (CFD), enhanced hydraulics, and various structure geometries...
    • 5 blades matrix body Well Drill Pdc Bit
    • 5 blades matrix body Well Drill Pdc Bit
    • 5 blades matrix body Well Drill Pdc Bit
    • 5 blades matrix body Well Drill Pdc Bit
    • 5 blades matrix body Well Drill Pdc Bit

    5 blades matrix body Well Drill Pdc Bit

    • Brand: Deris
    • Packaging: wooden case
    • Supply Ability: 150 PCS per Quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    Proper Application of PDC bit 1. When designing the PDC bit hydraulic parameters, the pump pressure must be greater than 13.0 MPa, using equal or approximate diameter. 2. Due to the poor impact resistance of diamond, the upper and lower drilling rigs cannot touch hard objects, and there must be no falling objects in...
    • 8.5inch 5blades Matrix body PDC drilling bit
    • 8.5inch 5blades Matrix body PDC drilling bit
    • 8.5inch 5blades Matrix body PDC drilling bit
    • 8.5inch 5blades Matrix body PDC drilling bit

    8.5inch 5blades Matrix body PDC drilling bit

    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    • Productivity: 30 pcs / week
    • Transportation: Ocean,Land,Air,Express
    8.5inch 5 blades Polycrystalline diamond compact (PDC) drill bits vertical intermediate section in the Midland Basin, but was having some challenges.The interval consists primarily of interbedded formations and high-strength stringers,causing a high degree of impact damage on their drill bits, and necessitating...
    • water well drilling non-coring pdc bit
    • water well drilling non-coring pdc bit
    • water well drilling non-coring pdc bit
    • water well drilling non-coring pdc bit
    • water well drilling non-coring pdc bit

    water well drilling non-coring pdc bit

    • Brand: Deris
    • Packaging: wooden case
    • Supply Ability: 150 PCS per Quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    Matrix Pdc Bits Preparation before drilling Tripping in 1.Remove the breaker and carefully lower the bit through the wellhead device in order not to damage it. 2.Shrinkage,shoulder,dogleg and key seat of borehole should be cautious when bit through blank hole. 3.Start pump and cycle drilling fluid to wash buttom hole...
    • 12.5inch 6blades Matrix body PDC  bit
    • 12.5inch 6blades Matrix body PDC  bit
    • 12.5inch 6blades Matrix body PDC  bit
    • 12.5inch 6blades Matrix body PDC  bit
    • 12.5inch 6blades Matrix body PDC  bit

    12.5inch 6blades Matrix body PDC bit

    • Brand: Deris
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    • Model No.: M433
    12.5inch 6 blades Polycrystalline diamond compact (PDC) drill bits, our PDC bits with very good quality enables you to reduce trips while using the most robust drilling equipment available. It protects your sensitive BHA components and your hole-quality by mitigating lateral vibrations. Its cutters are designed to...
    • PDC Drill bit water well machine rock drilling
    • PDC Drill bit water well machine rock drilling
    • PDC Drill bit water well machine rock drilling
    • PDC Drill bit water well machine rock drilling

    PDC Drill bit water well machine rock drilling

    • Brand: Deris
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    • Place of Origin: China
    PDC Drill bit for water well drill machine rock drilling bits: PDC stands for Polycrystalline Diamond Compact, which refers to the cutters on these drill bits. PDC bits have exceptional rates of penetration when drilling and can out preform other bits in the right conditions. The diamond cutters are 10 times stronger...
    • 311mm 12 1/4inch 6blades matrix body PDC bit
    • 311mm 12 1/4inch 6blades matrix body PDC bit
    • 311mm 12 1/4inch 6blades matrix body PDC bit
    • 311mm 12 1/4inch 6blades matrix body PDC bit

    311mm 12 1/4inch 6blades matrix body PDC bit

    • Brand: Deris
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    • Model No.: S233
    The PDC drill bit designed to run at high penetration rates even in applications that call for higher blade and cutter counts. Its unique cutting structure layout adds another dimension to bit stability and smooth running by combining the penetration rate potential of traditional "single set" cutter layouts with the...
    • PDC matrix body drill bit for sandstone drilling
    • PDC matrix body drill bit for sandstone drilling
    • PDC matrix body drill bit for sandstone drilling
    • PDC matrix body drill bit for sandstone drilling

    PDC matrix body drill bit for sandstone drilling

    • Brand: Deris
    • Packaging: Wooden case package
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    The Advantage of PDC bit 1.Suit for drilling medium hard to hard formations. 2.Evolute asymmetrical blade cutter design and balanced bit load so that bit whirl is prevented . 3.Composite gage protection and low torque design improve rate of penetration . 4.CFD hydraulic balance design results in better bit cleaning...
    • diamond cutter pdc non-core drill bits
    • diamond cutter pdc non-core drill bits
    • diamond cutter pdc non-core drill bits
    • diamond cutter pdc non-core drill bits

    diamond cutter pdc non-core drill bits

    • Brand: Deris
    • Packaging: wooden case
    • Supply Ability: 150 PCS per Quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    Preparation before drilling 1.Inspect previous bit for body damage, lost cutters or inserts etc. Make sure there are no any junk on bottom hole, and clean the bottom hole if necessary.2.Bit must be handled with care in order not no damage cutters and hard substances.3.Check if there is any damage on bit cutters and if...
    • 3-8 blades 8 inch steel body PDC bits
    • 3-8 blades 8 inch steel body PDC bits
    • 3-8 blades 8 inch steel body PDC bits
    • 3-8 blades 8 inch steel body PDC bits
    • 3-8 blades 8 inch steel body PDC bits

    3-8 blades 8 inch steel body PDC bits

    • Brand: Deris
    • Packaging: Wooden case package
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    3-8 blades 8 inch steel body PDC bits The Advantage of PDC bit 1.Suit for drilling medium hard to hard formations. 2.Evolute asymmetrical blade cutter design and balanced bit load so that bit whirl is prevented . 3.Composite gage protection and low torque design improve rate of penetration . 4.CFD hydraulic balance...
    • API PDC  diamond drill bits 5 blades
    • API PDC  diamond drill bits 5 blades
    • API PDC  diamond drill bits 5 blades
    • API PDC  diamond drill bits 5 blades

    API PDC diamond drill bits 5 blades

    • Brand: Deris
    • Packaging: Wooden case package
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    API PDC diamond drill bits 5 blades The Information of PDC bit 1.Suit for drilling medium hard to hard formations. 2.Evolute asymmetrical blade cutter design and balanced bit load so that bit whirl is prevented . 3.Composite gage protection and low torque design improve rate of penetration . 4.CFD hydraulic balance...
    • 5 blades pdc bit for oil gas equipment
    • 5 blades pdc bit for oil gas equipment
    • 5 blades pdc bit for oil gas equipment
    • 5 blades pdc bit for oil gas equipment

    5 blades pdc bit for oil gas equipment

    • Brand: Deris
    • Packaging: Wooden case package
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    The Information of PDC bit 1.Suit for drilling medium hard to hard formations. 2.Evolute asymmetrical blade cutter design and balanced bit load so that bit whirl is prevented . 3.Composite gage protection and low torque design improve rate of penetration . 4.CFD hydraulic balance design results in better bit cleaning...
    • API 8.5 PDC Diamond Drilling Bit Hard Formation
    • API 8.5 PDC Diamond Drilling Bit Hard Formation
    • API 8.5 PDC Diamond Drilling Bit Hard Formation

    API 8.5 PDC Diamond Drilling Bit Hard Formation

    • Brand: Deris
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    • Place of Origin: China
    API 8.5 PDC Diamond Drilling Bit Hard Formation: When drilling with PDC bits it is important to know and follow instructions for the recommended weight on the drill bit and to control the rotational speed.Total Drilling Solutions can supply PDC bits in sizes from 3.5" (88.9mm) to 12-1/4" (311.2 mm). Our PDC bits have...
    • ISO9001 Certification and PDC Material PDC BIT
    • ISO9001 Certification and PDC Material PDC BIT
    • ISO9001 Certification and PDC Material PDC BIT

    ISO9001 Certification and PDC Material PDC BIT

    • Brand: Deris
    • Supply Ability: 300 pcs per quarter
    • Min. Order: 1 Piece/Pieces
    • Certificate: ISO 9001
    • Place of Origin: China
    ISO9001 Certification and PDC Material PDC BIT: PDC Bits are an excellent choice for expensive or very deep wells and particularly excel when drilling in soft to medium hard formations.PDC bits can be constructed from steel bodies or matrix bodies. You will get a deeper hole out of a Matrix Body but they cannot be...
Home > Products > PDC Bit > Matrix Body PDC Bit

China Matrix Body PDC Bit Suppliers


Matrix body fixed cutters are made from tungsten carbide material. This provides improved wear resistance and erosion.Additionally, they are typically more heavy set as far as cutter count.In applications of high fluid volume or high sand, matrix body PDC bits offer longer life and multiple bit runs. 

 PDC Drill Bits are equipped with Hardened Alloy Steel base material;High performance PDC-Cutters;Carbide and Diamond gauge protection;Carbide/Diamond Shock Studs;Threaded or Plain Carbide Nozzles for Flushing

Above features are subject to changes and modifications according to customers' requirements.

Matrix Body PDC Bit advantage :

1. Force balanced, resist impact to the blade during high-speed drilling, to make bit work stable.
2. Plus wear knot section, reduce collision in the high-speed rotational vibration.
3. Patented matrix formulation, extended bit life.
4. Optimal hydraulic design, easy to move out the drill cuttings and cooling.
5. Equipped with back reaming Cutters.
6. The cutter is high performance to increase the ability of anti-impact and anti-abrasive

Characteristics of Matrix body PDC bits
1.PDC Cutters of different features are selected and bit profile design is optimized to suit different drilling applications in different formations to satisfy different requirement when drilling soft to medium hard formations 

2.Cutting structure is force balanced ,non-symmetrical blade and wide gage are designed so that the bit drills more stable and resulting longer working life of the bit

3.Better wear resistance and higher strength of the bit are guaranteed in regard to material and structure by using matrix body material with self-owned intellectual property rights and combining FEA analysis technology.

4.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.

5.CNC sintering process uses full automatic control. Inside and outside temperature of the bit is monitored during all procedures to fully embody material properties as well as ensure uniformity and stability of product quality.



New Products

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send